Download Firmware Samsung Galaxy Sl I9003

The XXKPN Gingerbread 2.3.5 update comes with tons of performance upgrades along the way, including faster Internet browsing, faster Android Market browsing even at slow Internet speeds, and a revamped user interface that will greatly extend overall battery life. Requirements. Make sure you have an ample supply of battery life left in your device. We advise that you have at least 60% battery left to ensure your phone will not turn off during the firmware update process.

1. Download Firmware Samsung Galaxy Sl I9003 Price

Make a backup of your phone’s data (e.g., contacts, messages, multimedia, settings, and other important files) as there might be a chance that your phone may be corrupted during the installation process. Enable USB Debugging on your phone. This can be done by going to Settings Applications Development USB Debugging. Once the necessary requirements have been met you can now proceed with the installation process. Installation Here are the steps for installing the firmware to your phone:. Download the latest firmware update files to your computer.

Get the ZIP file from. Unzip the contents of the ZIP file. When asked for a password, type “androidauthority.com” (without the quotes). The ZIP file contains three files: I9003XXKPNI9003XXKPNI9003SERKPNHOME.tar.md5, Odin3v1.0, and SSDL.dll. In the event that a single file is missing, you need to download again and extract the files before proceeding any further. Open the Odin flash tool from the extracted files.

Turn off your phone. Boot your phone into download mode. You can enter download mode by pressing and holding the Volume Down key + OK button (center button), and simultaneously pressing the Power button. Connect your phone to the computer using a USB cable. Make sure Odin is still running on your computer. Once you connect your phone, the ID: COM block in the Odin program will turn to yellow. This will indicate that the drivers have been successfully installed and your phone is recognized by the software.

Click the PDA button in Odin. In the popup window, choose I9003XXKPNI9003XXKPNI9003SERKPNHOME.tar.md5. Check that the other options in Odin are checked/unchecked as in the screenshot below:. Hit the Start button in Odin to begin the firmware update process. Your phone will reboot after the flashing is completed. Check whether or not you have successfully updated your phone by heading to Applications Settings About Phone. The firmware version ought to show XXKPN 2.3.5 Gingerbread.

Turn off your phone. Reboot the phone into recovery mode by pressing and holding down the Volume Up + OK buttons simultaneously and pressing the Power button while holding down those buttons. In the recovery mode menu, choose “Wipe data/factory reset.”. Choose “Wipe Cache partition”.

Go back to the main menu and then select “Reboot system now”. You now have Android 2.3.5 Gingerbread build XXKPN on your Samsung Galaxy SL I9003.

Even though the Samsung Galaxy SL I9003 is already history, its specs and features being now only mid-range ones, its users can still improve the performances of their devices by updating with a custom ROM firmware. Furthermore, by doing the same the Galaxy SL will be updated to custom Android 4.1.2 Jelly Bean software, so you will be able to test the latest Android apps and features on your own smartphone. If I have aroused your attention, then check the following lines and learn how to install the Jelly Bean 4.1.2 based Remics ROM on the Galaxy SL. First, remember that the Galaxy SL will no longer receive official updates from Samsung due to hardware limitations, so updating with custom ROMs is all that you can do for improving the OS, the performances and capabilities of your phone. Currently Gingerbread is the stock firmware for the SL, but as you know, there are many ICS and now Jelly Bean based custom platforms available for your device; you can take a look over our “” section for suitable tutorials. So, in order to conclude the up mentioned lines, here is what you need to know so far: the Remics system is not an official Jelly Bean update for your Galaxy SL; in fact we are dealing with a custom ROM firmware, which means that this guide is risky and complex.

Because of that you need to read all the next lines or else you can end up in bricking your handset. Furthermore, the SL will not receive the ICS or Jelly Bean touch so installing a custom firmware is the only solution for those who want to enjoy the same.

It is important to begin this tutorial with a backup operation because, as you will see below, during the update procedure a system wipe will be required. That means that all of your data which is being saved on the Samsung Galaxy SL internal storage memory will be erased. Therefore, take your time and backup the contacts list, folder, market apps, text messages, personal info and everything else you might need. Also, it is recommended to make a; in this way you can save / restore the stock ROM. Now, for being able to install the Jelly Bean based Remics custom ROM on the Galaxy SL, you first need to root your smartphone.

The firmware will have to access some internal programs and by rooting the system, the mentioned access will be granted. Be careful because by rooting the warranty gets void. Don’t worry though, as you can anytime restore it; all you need to do for getting back the warranty is a operation, or to apply a un-root procedure. If you don’t know how to root the Galaxy SL, then you can use our root procedures: choose between a general that can be applied on almost all the Android based devices, or use a Samsung dedicated solution; both operations are working perfectly so choose the one that you prefer the most. After rooting the OS, you need to install a custom recovery image on your Samsung Galaxy SL. The Remics Android 4.1.2 Jelly Bean ROM can be flashed only by using the recovery image tool, so don’t skip this part. Then, complete the rest of the pre requisites (which are being detailed during the next list) for ensuring that everything will go as planned.

You will have to use a computer or notebook, so the phone and its USB cable should be near you. The Remics firmware will be downloaded on the computer and then will be transferred on your device.

Deactivate all the security tools that are being installed on the computer and Galaxy SL. If an antivirus program is running on your devices, uninstall the same before going any further.

Download Firmware Samsung Galaxy Sl I9003 Price

Also make sure that your phone has enough battery life for staying alive during the flashing operation; charge the battery if you notice that there is less than 60% power left. On your handset go to “Settings - Applications - Development - USB debugging” and make sure that the USB debugging option is enabled. This tutorial is compatible only with the Samsung Galaxy SL model number I9003; don’t install the Jelly Bean 4.1.2 based Remics ROM on a similar or different smartphone because you will risk in bricking your Android powered devices.

How to Update Galaxy SL I9003 to Jelly Bean 4.1.2 with Remics Custom ROM Firmware. From download the update file. Save the firmware on your computer first; don’t extract the file. Now, connect your phone with the computer by using its USB cable. Take the update file from the computer and place it to your phone’s SD card.

Remove the USB cable. Now, turn off the handset. Reboot it into recovery mode. Then, by using the recovery mode menu, select “wipe data factory reset” and “wipe cache partition”; remember to backup the data first. Return to the main menu by choosing “go back”.

Up next, select “install zip from sd card” followed by “choose zip from sd card”. Select the firmware file from the SD card and start the update process. In the end, just select “go back”, “reboot system now” and you are done.

If somehow you will get a boot loop, the reboot into recovery once more and apply the wipe again. Congratulations, you have completed the steps by step guide meaning that now you can safely use your Galaxy SL device. Your phone has been updated with the Jelly Bean 4.1.2 based Remics custom ROM firmware, so I recommend you to test the software and check if there are bugs or issues included in the system (according to those of xda-developers – the ROM was developed by them – the Remics system is stable). Do tell us how things worked for you and share your impressions and thoughts with us by using the comments area from below. Use ES explorater for files music player: tehre are many.

TuneWiki or Mixzing (which are both radio wifi compatible.) mixZ can find some radio with your choice of style too and the “cerise”: invert your SD external card to become your SD intern. By “magic” app: mounts2SD (there one other app too. Not tested.(hey now have 16Go to get apps!!) then a “cache Booster PRo” or “SD speed increase” to give more cache to the exchanges between Sd card and ram that needs root but it can be easy done with a superuser app. And also the fact you’ve installed this release.

Youtube is all ok. All apps from 2.3.6 has been given a boost, and access to 4.0 apps is a very good thing too. Use to update to this, it’s a great rebirth to your old-2y phone. Very thankfull to have saved my phone from a crasy loop, just putting a ZIp in the right sd card (intern one!!) and the recovery mode (many sites present the method but invert the points!. Recovery is UP volume, central button + power on. Wait for vibration, wait 2second then just relaease power, not the other: that’s recovery mode, witht the zip OS inside to be used for flash;)) The bad thing i wouldn’t like to do, was to wipe my data.

Then saved all. But still with the saved files (contact and other massages (with a sms app). But the KIES dats are not accessible: IF anyone has an idea to use those prime files?